Skip to main content

Waterproof iPhone 6/6S Case Fork Stem Mount Kit

RRP: $119.95
Was: $119.95
Now: $79.95
(You save $40.00 )

or make 4 interest-free payments of $19.99 AUD fortnightly with Afterpay More info

250.00 Grams
Calculated at Checkout

Ultimateaddon Waterproof Tough Mount Case for iPhone 6 & 6S & Stem Mount Kit

Ultimateaddons waterproof tough case is designed to help keep their iPhone 6 protected during outdoor use. Designed specifically for the Apple iPhone 6/6S while allowing for use of all the major phone functions while still in this case with 3 Prong mounting attachment allowing it to work with wide range of mount attachments.

This case is designed specifically for the Apple iPhone 6 to help keep it safe, protected and dust free while using it outdoors. Designed with the Ultimateaddons 3 prong connection system on the back, this case can be used with a wide range of Ultimateaddons mounting attachments.

The outer shell of this case is made with hard durable plastic. The inside has a customised rubber waterproof insert with cut outs for most major phone functions. On the top there is access to the on/off switch. To the left there are the volume buttons and to the base there is access to the headphone socket with an improved rubber cap to cover socket while not in use and the charging port for our hard wire charging cable (please note that only the Ultimateaddons® hardwire cable will fit this case, other cables may not fit).

On the front and rear there are transparent cut outs for the camera, speaker and earpiece functions, ideal for using the camera function to take photo's or videos while the phone is protected in it's case.

The case locks with 2 super strong easy accessible clips and 3 new pressure clips this gives the case a water-tight seal around the Apple iPhone 6 with the touch screen is still usable. The case comes with a screen protector and useful lanyard.

This case has been rated to waterproof rating IPX5, higher than previous cases. Care should be taken to ensure that the case is locked properly and plugs are correctly inserted before use. This product should not be submerged in water, it has been designed to help protect your Apple iPhone 6 from dust and weather conditions allowing it to be safely used outdoors.

The Aluminium fork stem attachment is supplied with a 25mm (1") ball connector which is compatible with 1” B Size RAM Mount components. Unlike other fork stem products, the Ultimate Addons Motorcycle Fork Stem attachment uses aluminium sleeves for a secure and durable fit.

Simple to fit, just slide the attachment into the hole of the stem and tighten the two clamping bushes and then screw with an Allen key to create a tight fit. The Fork Stem kit is designed to fit into the steering head tube of fork stems and will work with various stem sizes.

Please note - This mount is not suitable for every Motorcycle. Please remove the cap and measure the internal diameter before purchasing (There may be a cap covering the fork stem on certain motorcycles)

The Ultimateaddons Fork Stem Kit comes in 5 sizes to suit many different motorcycles -

  • 10.0-13.3mm
  • 13.3-14.7mm
  • 15.0-17.2mm
  • 17.5-20.5mm
  • 20.5-24.5mm


Please measure your steering stem hole diameter and select the correct stem mount above. 


Tough Outdoor Design
This case has been designed to help protect your iPhone 6 from everyday outdoor use in a wide variety of weather conditions. This case has been rated to waterproof rating IPX5 and offers protection from dust and dirt. The case has a strong hard polycarbonate outer shell offering protection from impacts and scratches. Inside the case there is a bespoke moulded silicone insert that offers impact / shock protection while offering access to both the volume controls and power button. This case is suited to anyone that wishes to protect their iPhone 6 Plus while outdoors, from construction sites to rock climbing.


Access to iPhone Functions
The Ultimateaddons tough case gives you access to most of the iPhone 6 functions while helping to protect it in the case. The touch screen can be operated through the clear touch screen panel, some lighter gloves will work with the case. Access to both power button and volume controls via silicone pressure buttons. Front and rear camera access (no flash to be used). Headphone jack and power / sync cable access.

Please note that thumbprint recognition is not possible through the screen, use pin lock as alternative.


3 Prong Vehicle Mounting Connection System
The iPhone 6 is ideal for Sat Nav both on and off road, take advantage of this with this Tough Case. This case has been designed with the Ultimateaddons 3 prong connection system on the back to allow you to easily mount to a wide range of vehicles. The 3 prong mounting system is very easy to use, simply line up the 3 prongs on the back of the case with a 3 prong mounting attachment and slide down to connect. Ultimateaddons offer a wide range of 3 prong mounting attachments which will allow you to mount your iPhone onto your bicycle, golf trolley, motorcycle, scooter and many more, visit our attachment section for more information on available.


External Power Management Unlike many other cases on the market
Unlike many other cases on the market the Ultimateaddons tough case for the iPhone offers the ability to power the iPhone while it is protected within case. Powering the Smartphone while in the case is crucial if you plan on using Satellite Navigation while mounted to a vehicle. The battery of the iPhone will drain quickly if you are using GPS, full screen brightness and linking to a Bluetooth headset. The case is designed specifically for use with an Ultimateaddons® accessory power cable. The case closes and creates a seal around the cable, due to various thickness's and sizes of cables, we cannot support 3rd party cables being used within the case.



  • Ideal case solution for using the iPhone 6 outdoors
  • Helps keep the iPhone 6 secure & waterproof (rated to IPX5 - please check instructions included)
  • Protects your iPhone 6 from dust and dirt
  • Tough hard case design has new strong easy access clips to lock iPhone 6 inside case
  • Touch screen can still be used while in case
  • Internal dimensions of case designed specifically to fit the iPhone 6
  • Rubber insert helps reduce shock if dropped or bumped
  • New & improved covers for headphone and charger port, ensuring water tightness when not in use
  • Designed to allow Ultimateaddons hard wire charger cable to fit inside the case, available to buy separately from our shop
  • Case has a 3 prong mounting system on back of case allowing it to be mounted to Ultimateaddons 1 and 3 prong attachments
  • Embossed Ultimateaddons logo on case
  • Access to headphone, volume buttons & phone function button
  • Use your iPhone 6 excellent camera while still in case, ideal for photos & video clips
  • Listen to music through the device's speaker / make calls while still in case
  • Ideal for work & outdoor pursuits
  • Includes lanyard to hold mount around neck
  • Includes 1 x screen protector


Included in Package:

  • 1 x Ultimateaddons Tough Waterproof IPX5 Mount Case for Apple iPhone 6
  • 1 x Screen Protector
  • 1 x Lanyard
  • 1 x 3-Prong Adapter
  • 1 x Fork Stem Mount Kit
All Ultimate Addons products and parts come with a 12 Month Warranty against defects in materials and workmanship for the life of the product or part. The 12 Month Warranty covers the mount or its components only. The mounted device is not covered under the 12 Month Warranty and will not be replaced if damaged as a result of mount failure. This warranty is expressly limited to the persons who purchase Ultimate Addons product for resale or use in the ordinary course of the buyer's business from MotoGPS AU. This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use. In the unlikely situation that an Ultimate Addons product fails due to a manufacturing defect, please contact us to arrange the approved return of the item at your cost. We will evaluate the issue and either - 1. Repair the item and ship it back to you at our cost. 2. Replace the item with an equivalent product and ship it back to you at our cost. All approved warranty claims must be sent to the following address -

MOTOGPS Warranty Claim 
PO Box 206 
South Hurstville 
NSW 2221

 Please include a copy of your original invoice and your name and address details with the claim. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.