RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Short Double Socket Arm and Base Adapter for the TomTom Rider 2 and Urban Rider
The RAM-B-174-A-TOM1U consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 12.5mm to 31.8mm (0.5" to 1.25") in diameter, short double socket arm and custom TomTom base adapter.
The mounting hardware for brake/clutch reservoirs includes both standard and metric mounting bolts. The custom TomTom adapter base connects to the back of the factory cradle that is included with the purchase of the TomTom Rider 2/Urban Rider.
The screws that are included with the RAM-B-174-A-TOM1U match up with the threads on the back of the RIDER 2/Urban Rider.
The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Compatible with the following TomTom motorcycle GPS devices –
• Rider 2
• Urban Rider
The RAM-B-174-A-TOM1U can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 31.8mm (0.5" to 1.25") in diameter.
To see if the RAM-B-174-A-TOM1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").
Powder Coated Marine Grade Aluminium
1" Rubber Ball "B" Size
Brake/Clutch Reservoir Base Installation Manual