null
Skip to main content

RAM Mount Motorcycle M8 Handlebar Large X-Grip Kit

$94.95

or make 4 interest-free payments of $23.74 AUD fortnightly with Afterpay More info

SKU:
RAM-B-367-UN10U
Weight:
100.00 Grams
Shipping:
Calculated at Checkout

RAM Motorcycle Handlebar Clamp Base with M8 Bolts & Large Universal X-Grip

The RAM-B-367-UN10 consists of a M8 bolt base, double socket arm and a large universal X-Grip spring-loaded cradle.

This base is the starting point for the easiest way to mount your GPS Device to your motorcycle. It suits all handlebar clamps that use a M8 bolt. Choose a short or long arm and a suitable ball mount for your cradle and you are ready to go.

Your motorcycle rides on rubber tyres for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration.

With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.

The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. It is ideally suited to plus sized smartphones, phablets and many larger GPS devices.

The spring-loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your smartphone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the mobile phone cradle evolved.

The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below.

It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions:
Maximum Width = 114mm (4.5”)
Minimum Width = 45mm (1.75”)
Depth = 22mm (0.875”)

Compatible motorcycles:
Any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.

Included in this kit:
• 1 x M8 x 55mm bolt (1.25 thread pitch)
• 1 x M8 x 60mm bolt (1.25 thread pitch)
• 1 x M8 x 65mm bolt (1.25 thread pitch)

Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.

Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.

Material:
Powder Coated Marine Grade Aluminium, High Strength Composite & Stainless Steel

Note:
To determine if these bolts are compatible with your motorcycle measure the bolt for the diameter and add 30mm to the length. If it matches one of the 55, 60, or 65 mm length, then you can use the appropriate bolt supplied with the mount. If it does not match, you may be able to source the correct length of bolt locally. Be sure to use the correct torque spec when attaching the mount.

Downloads:
X-Grip Assembly Instructions

All RAM products and parts come with Lifetime Warranty against defects in materials and workmanship for the life of the product or part. The Lifetime Warranty covers the mount or its components only. The mounted device is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of mount failure. This warranty is expressly limited to the persons in the United States, and all foreign countries who purchase RAM for resale or use in the ordinary course of the buyer's business. This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use. In the unlikely situation that a RAM Mounts product fails due to a manufacturing defect, please contact us on info@motogps.com.au to arrange the approved return of the item at your cost. We will evaluate the issue and either - 1. Repair the item and ship it back to you at our cost 2. Replace the item with an equivalent product and ship it back to you at our cost All approved warranty claims must be sent to the following address - MOTOGPS Warranty Claim PO Box 206 South Hurstville NSW 2221 Australia Please include a copy of your original invoice and your name and address details with the claim. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure