RAM Mount Motorcycle Fork Stem Base Universal Finger Grip Kit

SKU:
RAM-B-176-UN4U
$114.95

or make 4 interest-free payments of $28.74 AUD fortnightly with Afterpay More info

RAM Fork Stem Mount with Double Socket Arm & Universal Finger Grip

The RAM-B-176-UN4 consists of a fork stem base, double socket arm and universal Finger Grip cradle.

This is one of the cleanest and most popular solutions for mounting your device cleanly on the centre of your bike. The fork stem mount is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 - 20mm and 28mm (0.5” – 1.10”) at the following intervals:

Metric       Imperial
12mm        0.5"
14mm        0.55"
16mm        0.63"
18mm        0.71"
20mm        0.79"
28mm        1.10"

Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. This allows for almost infinite adjustment and perfect viewing angles.

The patented design of RAM Mounts products dampens shock and vibration, helping to extend the life of your device.

The universal finger cradle is designed to hold a broad range of UHF Radios, GPS devices, smartphones and other electronic devices. The cradle comes with three different lengths of flexible rubber coated fingers to grip your device. Simply choose the length of finger that best suits your device. The fingers open by squeezing the ends to open the small finger arms.

The bottom of the cradle includes a back plate that adds support to the device being held by the mount. This mount is highly recommended for securing handheld two way radios and scanners.

Height Dimensions:
Minimum with Top and Bottom Plates: 133mm (5.25")
Maximum with Top and Bottom Plates: 152mm (6.0")
The top and bottom plates can be removed for larger devices.

Spine Plate Dimensions:
63mm x 127mm (2.5" x 5") Width x Height

Using Short Arm Side Clamps:
Maximum Depth: 19mm (0.75")
Minimum Width: 32mm (1.25")
Maximum Width: 76mm (3.0")

Using Medium Arm Side Clamps:
Maximum Depth: 32mm (1.25")
Minimum Width: 38mm (1.5")
Maximum Width: 89mm (3.5")

Using Long Arm Side Clamps:
Maximum Depth: 40mm (1.6")
Minimum Width: 57mm (2.25")
Maximum Width: 89mm (3.5")

Material:
Powder Coated Marine Grade Aluminium, High Strength Composite & Stainless Steel

Note:
Certain motorcycles require adding electrical tape to the area of the plug that is the largest diameter until it fits snugly in the stem. MotoGPS recommends that you review the installation instructions for this part prior to ordering.

Downloads:
Fork Stem Kit Instruction Manual
Finger Grip Assembly Instructions

 

Shipping Cost:
Calculated at Checkout
Weight:
120.00 Grams
Width:
9.00 (cm)
Height:
3.00 (cm)
Depth:
11.00 (cm)