
RAM Mounts
or make 4 interest-free payments of
$30.74 AUD
fortnightly with
More info
The RAM-B-174-UN4 consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 12.5mm to 31.8mm (0.5" to 1.25") in diameter, double socket arm and a universal finger grip cradle.
The mounting hardware for brake/clutch reservoirs includes both standard and metric mounting bolts.
The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The universal finger cradle is designed to hold a broad range of UHF Radios, GPS devices, smartphones and other electronic devices. The cradle comes with three different lengths of flexible rubber coated fingers to grip your device. Simply choose the length of finger that best suits your device. The fingers open by squeezing the ends to open the small finger arms.
The bottom of the cradle includes a back plate that adds support to the device being held by the mount. This mount is highly recommended for securing handheld two-way radios and scanners.
Height Dimensions:
Minimum with Top and Bottom Plates: 133mm (5.25")
Maximum with Top and Bottom Plates: 152mm (6.0")
The top and bottom plates can be removed for larger devices.
Spine Plate Dimensions:
63mm x 127mm (2.5" x 5") Width x Height
Using Short Arm Side Clamps:
Maximum Depth: 19mm (0.75")
Minimum Width: 32mm (1.25")
Maximum Width: 76mm (3.0")
Using Medium Arm Side Clamps:
Maximum Depth: 32mm (1.25")
Minimum Width: 38mm (1.5")
Maximum Width: 89mm (3.5")
Using Long Arm Side Clamps:
Maximum Depth: 40mm (1.6")
Minimum Width: 57mm (2.25")
Maximum Width: 89mm (3.5")
Material:
Powder Coated Marine Grade Aluminium, High Strength Composite
Note:
The RAM-B-174-UN4 can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 31.8mm (0.5" to 1.25") in diameter.
To see if the RAM-B-174-UN4 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").
Material:
Powder Coated Marine Grade Aluminium & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Downloads:
Brake/Clutch Reservoir Base Installation Manual
Finger Grip Assembly Instructions