RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Double Socket Arm and 1/4"-20 GoPro Adapter
The RAM-B-174-GOP1 consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 12.5mm to 31.8mm (0.5" to 1.25") in diameter, double socket arm and GoPro adapter.
The mounting hardware for brake/clutch reservoirs includes both standard and metric mounting bolts.
The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The adapter consists of a 1" diameter rubber ball, connected to a custom GoPro mount pattern. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket and allowing a much larger level of adjustment.
Compatible with the following devices:
• GoPro Hero & Session Action Cameras
• Garmin VIRB XE Action Camera
• Knog Qudos Action Camera Light
• Any camera or accessory with a GoPro compatible mount base
1. Patented rubber ball design dampens shock and vibration helping to extend the life of your camera.
2. Mount to many RAM double socket arms and mounts.
3. Multiple articulation and adjustment points for perfect viewing angles.
4. Lifetime warranty.
5. Made in the U.S.A.
The RAM-B-174-GOP1 can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 31.8mm (0.5" to 1.25") in diameter.
To see if the RAM-B-174-GOP1 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").
Powder Coated Marine Grade Aluminium & High Strength Composite
1" Rubber Ball "B" Size