null
Skip to main content

RAM Mount Combination Garmin GPSMAP 62 64 Astro 320 Cradle Kit

$89.95

or make 4 interest-free payments of $22.49 AUD fortnightly with Afterpay More info

SKU:
RAM-B-174-GA41U
Weight:
350.00 Grams
Shipping:
Calculated at Checkout

RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Garmin GPSMAP 62 64 Astro 320 Cradle Kit

The RAM-B-174-GA41 consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 12.5mm to 31.8mm (0.5" to 1.25") in diameter, double socket arm and a Garmin GPS cradle.

The mounting hardware for brake/clutch reservoirs includes both standard and metric mounting bolts.

The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.

The included high strength composite, form fitting cradle offers full access to the device’s ports and is designed to hold and protect the device in high vibration environments.

Compatible with the following devices:
• Garmin Astro 320
• Garmin GPSMAP 62
• Garmin GPSMAP 62s
• Garmin GPSMAP 62sc
• Garmin GPSMAP 62st
• Garmin GPSMAP 62stc
• Garmin GPSMAP 64
• Garmin GPSMAP 64s
• Garmin GPSMAP 64st

Features:
1. Open access to all electronic ports
2. High strength materials ensure product longevity
3. Full access to all ports
4. Lifetime warranty
5. Made in the U.S.A.

Note:
The RAM-B-174-GA41 can mount to both the brake/clutch reservoir or any round rail that is 12.5mm to 31.8mm (0.5" to 1.25") in diameter.

To see if the RAM-B-174-GA41 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centres have a minimum width of 24mm (0.94") and a maximum of 40mm (1.58").

Material:
Powder Coated Marine Grade Aluminium & High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

Downloads:
Brake/Clutch Reservoir Base Installation Manual

All RAM products and parts come with Lifetime Warranty against defects in materials and workmanship for the life of the product or part. The Lifetime Warranty covers the mount or its components only. The mounted device is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of mount failure. This warranty is expressly limited to the persons in the United States, and all foreign countries who purchase RAM for resale or use in the ordinary course of the buyer's business. This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use. In the unlikely situation that a RAM Mounts product fails due to a manufacturing defect, please contact us on info@motogps.com.au to arrange the approved return of the item at your cost. We will evaluate the issue and either - 1. Repair the item and ship it back to you at our cost 2. Replace the item with an equivalent product and ship it back to you at our cost All approved warranty claims must be sent to the following address - MOTOGPS Warranty Claim PO Box 206 South Hurstville NSW 2221 Australia Please include a copy of your original invoice and your name and address details with the claim. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure